An engineer reconfigures the port-channel between SW1 and SW2 from an access port to a trunk and immediately notices this error in SW1’s log: *Mar 1 09:47:22.245: %PM-4-ERR_DISABLE: bpduguard error detected on Gi0/0, putting Gi0/0 in err-disable state Which command set resolves this error?

Refer to the exhibit. An engineer reconfigures the port-channel between SW1 and SW2 from an access port to a trunk and immediately notices this error in SW1’s log: *Mar 1 09:47:22.245: %PM-4-ERR_DISABLE: bpduguard error detected on Gi0/0, putting Gi0/0 in err-disable state Which command set resolves this error?

A. SW1(config-if)#interface G0/0
SW1(config-if)#no spanning-tree bpdufilter
SW1(config-if)#shut
SW1(config-if)#no shut
B. SW1(config-if)#interface G0/0
SW1(config-if)#no spanning-tree bpduguard enable
SW1(config-if)#shut
SW1(config-if)#no shut
C. SW1(config-if)#interface G0/0
SW1(config-if)#spanning-tree bpduguard enable
SW1(config-if)#shut
SW1(config-if)#no shut
D. SW1(config-if)#interface G0/1
SW1(config-if)#spanning-tree bpduguard enable
SW1(config-if)#shut
SW1(config-if)#no shut

Answer: Option B.

Explanation:

No answer description available for this question

The post An engineer reconfigures the port-channel between SW1 and SW2 from an access port to a trunk and immediately notices this error in SW1’s log: *Mar 1 09:47:22.245: %PM-4-ERR_DISABLE: bpduguard error detected on Gi0/0, putting Gi0/0 in err-disable state Which command set resolves this error? appeared first on Majanto.