Tag Archives: addresses

The network team must implement MPLS LDP session protection with two requirements: * Session protection is provided for core loopback IP addresses only. * The LDP session must remain operational for one hour when the WAN link on PE-XR1 fails. Which configuration must the team implement on PE-XR1?

Refer to the exhibit. The network team must implement MPLS LDP session protection with two requirements: * Session protection is provided for core loopback IP addresses only. * The LDP session must remain operational for one hour when the WAN link on PE-XR1 fails. Which configuration must the team implement on PE-XR1? A. configure terminal ipv4 access-list LDP-SESSION-PROTECTION… Read More »

The service provider must make sure that the Area 2 routing database limits the number of IP addresses in the routing table Which two configurations must be implemented to meet the requirements? (Choose two)

Refer to the exhibit. A network engineer must meet these requirements to provide a connects, solution: The customer connected to Area 2 needs to access the application in Area 1 on the 10.10.10.0/24 subnet The Customer must not have access to the 20.10 30.0/24 subnet. The service provider must make sure that the Area 2 routing database limits… Read More »

Which set of commands on router R1 allow deterministic translation of private hosts PC1, PC2, and PC3 to addresses in the public space?

Refer to the exhibit. Which set of commands on router R1 allow deterministic translation of private hosts PC1, PC2, and PC3 to addresses in the public space? A. RouterR1(config)#int f0/0 RouterR1(config)#ip nat inside RouterR1(config)#exit RouterR1(config)#int f0/1 RouterR1(config)#ip nat outside RouterR1(config)#exit RouterR1(config)#access-list 1 10.10.10.0 0.0.0.255 RouterR1(config)#ip nat inside source list 1 interface f0/1 overload B. RouterRI (config)#int fO/O RouterRI… Read More »

A client device roams between access points located on different floors in an atrium. The access points are joined to the same controller and configured in local mode. The access points are in different AP groups and have different IP addresses, but the client VLAN in the groups is the same. What type of roam occurs?

A. inter-controller B. inter-subnet C. intra-VLAN D. intra-controller Answer: Option D. Explanation:  Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_010011.html Show AnswerDiscussion The post A client device roams between access points located on different floors in an atrium. The access points are joined to the same controller and configured in local mode. The access points are in different AP groups and have different IP… Read More »

Which two probes must be enabled for the ARP cache to function in the Cisco ISE profiling service so that a user can reliably bind the IP addresses and MAC addresses of endpoints? (Choose two.)

A. SNMP B. HTTP C. RADIUS D. DHCP E. NetFlow Answer: Option C, D. Explanation:  Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html Show AnswerDiscussion The post Which two probes must be enabled for the ARP cache to function in the Cisco ISE profiling service so that a user can reliably bind the IP addresses and MAC addresses of endpoints? (Choose two.) appeared first… Read More »

Which two statements about mapping multicast IP addresses to MAC addresses are true? (Choose two.)

A. All mapped multicast MAC addresses begin with 0x0100.5E B. The router performs the mapping before it hands the packet off to a switch C. All multicast MAC addresses end with 0x0100.5E D. The mapping process may generate overlapping addresses, which can cause receivers to receive unwanted packets E. All destination MAC addresses begin with an octet of… Read More »

Dan Owns A Farm Supply Store That Sells Plows To Farmers. His Suppliers Released A New Plow, And He Wants To Get The Word Out To His Existing Customers Using Google Ads. He’s Got The Information Needed To Create A Customer Match Audience, But He’s Not Sure Where He Needs To Upload This Information. Where Does Dan Upload Customer Information, Such As E-Mail Addresses, To Start The Customer Match Process?

Dan Owns A Farm Supply Store That Sells Plows To Farmers. His Suppliers Released A New Plow, And He Wants To Get The Word Out To His Existing Customers Using Google Ads. He’s Got The Information Needed To Create A Customer Match Audience, But He’s Not Sure Where He Needs To Upload This Information. Where Does Dan Upload… Read More »