Tag Archives: connected

An engineer must extend Layer 2 Between two campus sites connected through an MPLS backbone that encapsulates Layer 2 and Layer 3 data Which action must the engineer perform on the routers to accomplish this task?

A. Configure a EtherChannel for E-LAN. B. Configure a pseudowire for E-LINE. C. Configure Cisco MPLS TE for use with E-TREE. D. Configure QoS for MPLS and E-ACCESS Answer: Option B. Explanation:  No answer description available for this question Show AnswerDiscussion The post An engineer must extend Layer 2 Between two campus sites connected through an MPLS backbone… Read More »

CE1 and CE2 require connectivity to the internet through the ISP connected to PE3 What should an engineer configure to complete this task?

Refer to the exhibit. CE1 and CE2 require connectivity to the internet through the ISP connected to PE3 What should an engineer configure to complete this task? A. PE2 must be configured to serve as a route reflector for PE3 routes learned from the internet. PE2 then shares the routes with CE1 and CE2. B. CE1 and CE2… Read More »

Users on a network connected to router R3 report slow speeds when they connect to the server connected to R2. After analyzing traffic on the network, a network engineer identified congestion on the link between R2 and R3 as the cause. Which QoS service must the engineer implement to drop traffic on the link when it exceeds a configured threshold?

Refer the exhibit. Users on a network connected to router R3 report slow speeds when they connect to the server connected to R2. After analyzing traffic on the network, a network engineer identified congestion on the link between R2 and R3 as the cause. Which QoS service must the engineer implement to drop traffic on the link when… Read More »

Which NTP Stratum level is a server that is connected directly to an authoritative time source?

A. Stratum 0 B. Stratum 1 C. Stratum 14 D. Stratum 15 Answer: Option B. Explanation:  Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/bsm/16-6-1/b-bsm-xe-16-6-1-asr920/bsm-time-calendar-set.html Show AnswerDiscussion The post Which NTP Stratum level is a server that is connected directly to an authoritative time source? appeared first on Majanto.

Which configuration establishes EBGP neighborship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP?

Refer to the exhibit. Which configuration establishes EBGP neighborship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP? A. R1(config)#router bgp 1 R1(config-router)#neighbor 192.168.10.2 remote-as 2 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 192.168.10.1 remote-as 1 R2(config-router)#network 10.2.2.0 mask 255.255.255.0 B. R1(config)#router bgp 1 R1(config-router)#neighbor 10.2.2.2 remote-as 2 R1(config-router)#network… Read More »

Which command allows hosts that are connected to FastEthernet0/2 to access the Internet?

Refer to the exhibit. Which command allows hosts that are connected to FastEthernet0/2 to access the Internet? A. ip nat inside source list 10 interface FastEthernet0/1 overload B. ip nat inside source list 10 interface FastEthernet0/2 overload C. ip nat outside source list 10 interface FastEthernet0/2 overload D. ip nat outside source static 209.165.200.225 10.10.10.0 overload Answer: Option… Read More »

A client device fails to see the enterprise SSID, but other client devices are connected to it. What is the cause of this issue?

A. The client has incorrect credentials stored for the configured broadcast SSID. B. The hidden SSID was not manually configured on the client. C. The broadcast SSID was not manually configured on the client. D. The client has incorrect credentials stored for the configured hidden SSID. Answer: Option B. Explanation:  No answer description available for this question Show… Read More »

An engineer must block all traffic from a router to its directly connected subnet 209.165.200.0/24. The engineer applies access control list EGRESS in the outbound direction on the GigabitEthernet0/0 interface of the router. However, the router can still ping hosts on the 209.165.200.0/24 subnet. Which explanation of this behavior is true?

Refer to the exhibit. An engineer must block all traffic from a router to its directly connected subnet 209.165.200.0/24. The engineer applies access control list EGRESS in the outbound direction on the GigabitEthernet0/0 interface of the router. However, the router can still ping hosts on the 209.165.200.0/24 subnet. Which explanation of this behavior is true? A. Access control… Read More »

Which configuration establishes EBGP neighbor ship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP?

Refer to the exhibit. Which configuration establishes EBGP neighbor ship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP? A. R1(config)#router bgp 1 R1(config-router)#neighbor 192.168.10.2 remote-as 2 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 192.168.10.1 remote-as 1 R2(config-router)#network 10.2.2.0 mask 255.255.255.0 B. R1(config)#router bgp 1 R1(config-router)#neighbor 10.2.2.2 remote-as 2… Read More »

What NTP Stratum level is a server that is connected directly to an authoritative time source?

A. Stratum 0 B. Stratum 1 C. Stratum 14 D. Stratum 15 Answer: Option B. Explanation:  Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/bsm/16-6-1/b-bsm-xe-16-6-1-asr920/bsm-time-calendar-set.html Show AnswerDiscussion The post What NTP Stratum level is a server that is connected directly to an authoritative time source? appeared first on Majanto.