Tag Archives: traffic

Which should you use to distribute Incoming traffic between a set of web servers?

Which should you use to distribute Incoming traffic between a set of web servers? A. Load Balances B. Internet Gateway C. Autoscallng D. Dynamic Routing Gateway Correct Answer: A The Oracle Cloud Infrastructure Load Balancing service provides automated traffic distribution from one entry point to multiple servers reachable from your virtual cloud network (VCN). The service offers a… Read More »

An engineer has started to configure a router for OSPF, as shown Which configuration must an engineer apply on the network so that area 15 traffic from R5 to R1 will prefer the route through R4?

Refer to the exhibit. An engineer has started to configure a router for OSPF, as shown Which configuration must an engineer apply on the network so that area 15 traffic from R5 to R1 will prefer the route through R4? A. Place the link between R3 and R5 in a stub area to force traffic to use the… Read More »

If RC is a stub router, which entry must be injected so that it will send traffic outside the OSPF domain?

Refer to the exhibit. If RC is a stub router, which entry must be injected so that it will send traffic outside the OSPF domain? A. more specific route B. virtual link between RB and RC C. sham link D. default route Answer: Option D. Explanation:  No answer description available for this question Show AnswerDiscussion The post If… Read More »

An engineer is implementing MPLS OAM to monitor traffic within the MPLS domain. Which action must the engineer perform to prevent packets from being forwarded beyond the service provider domain when the LSP is down?

A. Configure a private IP address as the destination address of the headend router of Cisco MPLS TE. B. Disable IP redirects only on outbound interfaces. C. Disable IP redirects on all ingress interfaces. D. Implement the destination address for the LSP echo request packet in the 127.x.y.z/8 network. Answer: Option D. Explanation:  No answer description available for… Read More »

Users on a network connected to router R3 report slow speeds when they connect to the server connected to R2. After analyzing traffic on the network, a network engineer identified congestion on the link between R2 and R3 as the cause. Which QoS service must the engineer implement to drop traffic on the link when it exceeds a configured threshold?

Refer the exhibit. Users on a network connected to router R3 report slow speeds when they connect to the server connected to R2. After analyzing traffic on the network, a network engineer identified congestion on the link between R2 and R3 as the cause. Which QoS service must the engineer implement to drop traffic on the link when… Read More »

A customer has requested that the service provider use a Cisco MPLS TE tunnel to force the E-line service to take a specific route What is used to send the traffic over the tunnel?

A. static route B. preferred path C. forwarding adjacency D. autoroute destination Answer: Option B. Explanation:  No answer description available for this question Show AnswerDiscussion The post A customer has requested that the service provider use a Cisco MPLS TE tunnel to force the E-line service to take a specific route What is used to send the traffic… Read More »

An engineer must apply an 802.1ad-compliant configuration to a new switchport with these requirements; The switchport must tag all trame when it enters the port The switchport Is expected to provide the same level of service to traffic from any customer VLAN Which configuration must the engineer use?

A. Option A B. Option B C. Option C D. Option D Answer: Option D. Explanation:  https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-3s/asr903/16-12-1/bce-xe-16-12-asr900/m_ce_802_1ad_900.html Show AnswerDiscussion The post An engineer must apply an 802.1ad-compliant configuration to a new switchport with these requirements; The switchport must tag all trame when it enters the port The switchport Is expected to provide the same level of service to… Read More »

A network engineer is in the process of implementing IS-IS Area 1 and Area 2 on this network to segregate traffic between different segments of the network The hosts in the two new areas must maintain the ability to communicate with one another In both directions. Which additional change must be applied?

Refer to the exhibit A network engineer is in the process of implementing IS-IS Area 1 and Area 2 on this network to segregate traffic between different segments of the network The hosts in the two new areas must maintain the ability to communicate with one another In both directions. Which additional change must be applied? A. Reconfigure… Read More »

Which action does the ingress VTEP perform on traffic between EVPN VXLAN overlays?

A. routing and tunneling when doing symmetric IRB B. routing when doing asymmetric IRB C. routing and bridging when doing asymmetric IRB D. bridging when doing symmetric IRB Answer: Option C. Explanation:  https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guidec07-734107.html Show AnswerDiscussion The post Which action does the ingress VTEP perform on traffic between EVPN VXLAN overlays? appeared first on Majanto.

EIGRP is running across the core to exchange internal routes, and each router maintains iBGP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1 and R2 for IP address 10.0.1.1, which is used as a black hole route as shown. Which configuration should the operator implement to the management router to create a route map that will redistribute tagged static routes into BGP and create a static route to blackhole traffic with tag 777 that is destined to the server at 192.168.10.100?

router(config)# route-map blackhole-trigger router(config-route-map)# match tag 777 router(config-route-map)# set ip next-hop 10.0.1.1 router(config-route-map)# set origin igp router{config-route-map)# set community no-export Refer to the exhibit. EIGRP is running across the core to exchange internal routes, and each router maintains iBGP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1… Read More »