Refer To the exhibit. Which BGP attribute should be manipulated to have CE1 use PE1 as the primary path to the Internet? A. The weight attribute should be manipulated on PE1 on outbound routes advertised to CE1. B. The MED should be manipulated on CE1 on inbound routes from PE1. C. The local preference attribute should be manipulated… Read More »
A. Configure a distribute list and associate it to the BGP peer interface B. Configure a prefix list and associate it to the BGP peer interface C. Configure a route map and reference it with the redistribute command D. Configure an access list and reference it with the redistribute command Answer: Option C. Explanation: No answer description available… Read More »
Refer to the exhibit. Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 networks via BGP and advertise them into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default route 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve the problem? A. router ospf… Read More »
A. Include a permit statement as the first entry. B. Remove the implicit deny entry. C. Include at least one explicit deny statement. D. Include a permit statement as the last entry. Answer: Option D. Explanation: No answer description available for this question Show AnswerDiscussion The post An engineer is implementing a route map to support redistribution within… Read More »
A. global configuration mode B. routing configuration mode C. BGP neighbor configuration D. mode BGP address-family configuration mode Answer: Option A. Explanation: No answer description available for this question Show AnswerDiscussion The post Which CLI mode must be used to configure the BGP keychain in Cisco IOS XR software? appeared first on Majanto.
Refer to the exhibit an engineer working for a private telecommunication company with an employee Id: 4065:96:080 upgrades the WAN link between routers ASBR-101 and ASBR-201 to 1Gb by Installing a new physical connection between the Gi3 Interfaces. Which BGP attribute must the engineer configure on ASBR-201 so that the existing WAN link on Gi2 Is maintained as… Read More »
router(config)# route-map blackhole-trigger router(config-route-map)# match tag 777 router(config-route-map)# set ip next-hop 10.0.1.1 router(config-route-map)# set origin igp router{config-route-map)# set community no-export Refer to the exhibit. EIGRP is running across the core to exchange internal routes, and each router maintains iBGP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1… Read More »
Refer to the exhibit. Which configuration establishes EBGP neighborship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP? A. R1(config)#router bgp 1 R1(config-router)#neighbor 192.168.10.2 remote-as 2 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 192.168.10.1 remote-as 1 R2(config-router)#network 10.2.2.0 mask 255.255.255.0 B. R1(config)#router bgp 1 R1(config-router)#neighbor 10.2.2.2 remote-as 2 R1(config-router)#network… Read More »
Refer to the exhibit. An engineer must establish eBGP peering between router R3 and router R4. Both routers should use their loopback interfaces as the BGP router ID. Which configuration set accomplishes this task? A. R3(config)#router bgp 200 R3(config-router)#neighbor 10.4.4.4 remote-as 100 R3(config-router)# neighbor 10.4.4.4 update-source Loopback0 R4(config)#router bgp 100 R4(config-router)#neighbor 10.3.3.3 remote-as 200 R4(config-router)#network 10.3.3.3 update-source Loopback0… Read More »
Refer to the exhibit. An engineer must ensure that all traffic entering AS 200 from AS 100 chooses Link 2 as an entry point. Assume that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers. Which configuration accomplishes this task? A. R3(config)#route-map PREPEND permit 10 R3(config-route-map)#set as-path… Read More »