Tag Archives: applied

Which attribute in the rules was the silent (always) explanation option applied to?

Which attribute in the rules was the silent (always) explanation option applied to? A. the applicant’s yearly earnings in USD B. the applicant has at least the minimum required number of exam points C. the applicant satisfies the educational criteria D. the applicant’s number of exam points E. the applicant satisfies the financial criteria Correct Answer: B

A network engineer is in the process of implementing IS-IS Area 1 and Area 2 on this network to segregate traffic between different segments of the network The hosts in the two new areas must maintain the ability to communicate with one another In both directions. Which additional change must be applied?

Refer to the exhibit A network engineer is in the process of implementing IS-IS Area 1 and Area 2 on this network to segregate traffic between different segments of the network The hosts in the two new areas must maintain the ability to communicate with one another In both directions. Which additional change must be applied? A. Reconfigure… Read More »

On which interfaces should VRRP commands be applied to provide first hop redundancy to PC-01 and PC-02?

Refer to the exhibit. On which interfaces should VRRP commands be applied to provide first hop redundancy to PC-01 and PC-02? A. G0/0 and GO/1 Dn Core B. G0/0 on Edge-01 and G0/0 on Edge-02 C. GO/1 on Edge-01 and GO/1 on Edge-02 D. GO/O and GO/1 on ASW-01 Answer: Option C. Explanation:  No answer description available for… Read More »

Which command when applied to the Atlanta router reduces type 3 LSA flooding into the backbone area and summarizes the inter-area routes on the Dallas router?

Refer to the exhibit. Which command when applied to the Atlanta router reduces type 3 LSA flooding into the backbone area and summarizes the inter-area routes on the Dallas router? A. Atlanta(config-router)#area 0 range 192.168.0.0 255.255.252.0 B. Atlanta(config-router)#area 1 range 192.168.0.0 255.255.248.0 C. Atlanta(config-router)#area 0 range 192.168.0.0 255.255.248.0 D. Atlanta(config-router)#area 1 range 192.168.0.0 255.255.252.0 Answer: Option D. Explanation: … Read More »

Which outbound access list, applied to the WAN interface of a router, permits all traffic except for http traffic sourced from the workstation with IP address 10.10.10.1?

A. ip access-list extended 200deny tcp host 10.10.10.1 eq 80 any permit ip any any B. ip access-list extended 10deny tcp host 10.10.10.1 any eq 80 permit ip any any C. ip access-list extended NO_HTTPdeny tcp host 10.10.10.1 any eq 80 D. ip access-list extended 100 deny tcp host 10.10.10.1 any eq 80 permit ip any any Answer:… Read More »

Which two actions, when applied in the LAN network segment, will facilitate Layer 3 CAPWAP discovery for lightweight AP? (Choose two.)

A. Utilize DHCP option 43. B. Utilize DHCP option 17. C. Configure an ip helper-address on the router interface. D. Enable port security on the switch port. E. Configure WLC IP address on LAN switch Answer: Option A, C. Explanation:  No answer description available for this question Show AnswerDiscussion The post Which two actions, when applied in the… Read More »

Under which network conditions is an outbound QoS policy that is applied on a router WAN interface most beneficial?

A. under traffic classification and marking conditions B. under interface saturation conditions C. under all network conditions D. under network convergence conditions Answer: Option A. Explanation:  No answer description available for this question Show AnswerDiscussion The post Under which network conditions is an outbound QoS policy that is applied on a router WAN interface most beneficial? appeared first… Read More »

An engineer must protect the CPU of the router from high rates of NTP, SNMP, and SSH traffic. Which two configurations must be applied to drop these types of traffic when it continuously exceeds 320 kbps? (Choose two.)

Refer to the exhibit. An engineer must protect the CPU of the router from high rates of NTP, SNMP, and SSH traffic. Which two configurations must be applied to drop these types of traffic when it continuously exceeds 320 kbps? (Choose two.) A. R1(config-pmap)#class CLASS-CoPP-Management R1(config-pmap-c)#police 32 conform-action transmit exceed-action drop violate-action transmit B. R1(config)#policy-map POLICY-CoPP R1(config-pmap)#class CLASS-CoPP-Management… Read More »

An engineer must modify the access control list EGRESS to allow all IP traffic from subnet 10.1.10.0/24 to 10.1.2.0/24. The access control list is applied in the outbound direction on router interface GigabitEthernet 0/1. Which configuration command set will allow this traffic without disrupting existing traffic flows?

Refer to the exhibit. An engineer must modify the access control list EGRESS to allow all IP traffic from subnet 10.1.10.0/24 to 10.1.2.0/24. The access control list is applied in the outbound direction on router interface GigabitEthernet 0/1. Which configuration command set will allow this traffic without disrupting existing traffic flows? Answer: Option D. Explanation:  No answer description… Read More »