Tag Archives: change

Which use case validates a change of authorization?

A. An endpoint that is disconnected from the network is discovered. B. Endpoints are created through device registration for the guests. C. An endpoint profiling policy is changed for authorization policy. D. An authenticated, wired EAP-capable endpoint is discovered. Answer: Option C. Explanation:  Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_prof_pol.html Show AnswerDiscussion The post Which use case validates a change of authorization? appeared… Read More »

Which switch configuration change will allow only one voice and one data endpoint on each port? interface GigabitEthernetl/O/1 authentication host-mode multi-auth authentication post-control auto mab dotlx pae authenticator

A. auto to manual B. mab to dot1x C. multi-auth to multi-domain D. multi-auth to single-auth Answer: Option C. Explanation:  Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-6/ configuration_guide/sec/b_166_sec_9300_cg/configuring_ieee_802_1x_port_based_authentication.html Show AnswerDiscussion The post Which switch configuration change will allow only one voice and one data endpoint on each port? interface GigabitEthernetl/O/1 authentication host-mode multi-auth authentication post-control auto mab dotlx pae authenticator appeared first on… Read More »

An engineer must change from using NETCONF for streaming telemetry to telemetry data using gRPC framework because NETCONF uses XML for message and payload encoding. Which two messages and payload encodings does gNMI use? (Choose two.)

A. gNMI notifications with XML B. protobuf notifications with XML C. protobuf payload D. JSON payload E. gNMI notifications with JSON Answer: Option C, E. Explanation:  Reference: https://books.google.com/books?id=4AqXDwAAQBAJ&pg=PT131&lpg=PT131&dq=messages+and+payload+encodings+does+gNMI+use&source=bl&ots=81hpFjIZ_9&sig=ACfU3U1EAEwjRMBnCiHNESBwFLHvZDHkBw&hl=en&sa=X&ved=2ahUKEwjirNeZptfpAhXDoFsKHeqMBFsQ6AEwBHoECAsQAQ#v=onepage&q=messages%20and%20payload%20encodings%20does%20gNMI%20use&f=false Show AnswerDiscussion The post An engineer must change from using NETCONF for streaming telemetry to telemetry data using gRPC framework because NETCONF uses XML for message and payload encoding. Which… Read More »

After this operation, what else is needed to change the hostname of the router to IOS-XR-SJC-19?

Refer to the exhibit. After this operation, what else is needed to change the hostname of the router to IOS-XR-SJC-19? A. <confirm> B. <close-session> C. <get-config> D. <commit> Answer: Option D. Explanation:  No answer description available for this question Show AnswerDiscussion The post After this operation, what else is needed to change the hostname of the router to… Read More »

A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?

Refer to the exhibit. A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if… Read More »

An engineer applied the configuration on R1 to prevent network 192.168.1.0/24 from being propagated outside of area 5. After the change, users have reported they are not able to access any of the application servers that were working before. While checking the routing table of the peer router, the engineer notices R1 stopped propagating any routes outside area 5. Which action must be taken to fix the problem?

Refer to the exhibit. An engineer applied the configuration on R1 to prevent network 192.168.1.0/24 from being propagated outside of area 5. After the change, users have reported they are not able to access any of the application servers that were working before. While checking the routing table of the peer router, the engineer notices R1 stopped propagating… Read More »

A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails. Which configuration change resolves this issue?

A. Upgrade the high availability pair to version 10.6.2 image first and then upgrade to version 10.6.3. B. Save configuration and use the upgrade script to upgrade the high availability pair without breaking the high availability. C. Break the high availability using the cmxha config disable command and upgrade the primary and secondary individuality. D. Run root patch… Read More »

Simon’s Been In The Marketing Industry For A Few Years. He’s Learning About The Ways Machine Learning Can Help Both Him As A Marketer And His Target Users. How Will Machine Learning Change His Core Responsibilities?

Simon’s Been In The Marketing Industry For A Few Years. He’s Learning About The Ways Machine Learning Can Help Both Him As A Marketer And His Target Users. How Will Machine Learning Change His Core Responsibilities? It allows for more time to focus on strategy and creating customer experiences. It’s an efficient way to learn what account structures… Read More »

When Setting A Long-Term Strategy For App Promotion, It’s Important To Recognize That Objectives May Change Over Time. Put The Following Phases In The Recommended Order Of Occurrence.

When Setting A Long-Term Strategy For App Promotion, It’s Important To Recognize That Objectives May Change Over Time. Put The Following Phases In The Recommended Order Of Occurrence. Build user base and installs at scale. Add campaigns that focus on higher-value installs by focusing on in-app actions. Activate existing users with engagement campaigns.