Tag Archives: WAN

The network team must implement MPLS LDP session protection with two requirements: * Session protection is provided for core loopback IP addresses only. * The LDP session must remain operational for one hour when the WAN link on PE-XR1 fails. Which configuration must the team implement on PE-XR1?

Refer to the exhibit. The network team must implement MPLS LDP session protection with two requirements: * Session protection is provided for core loopback IP addresses only. * The LDP session must remain operational for one hour when the WAN link on PE-XR1 fails. Which configuration must the team implement on PE-XR1? A. configure terminal ipv4 access-list LDP-SESSION-PROTECTION… Read More »

an engineer working for a private telecommunication company with an employee Id: 4065:96:080 upgrades the WAN link between routers ASBR-101 and ASBR-201 to 1Gb by Installing a new physical connection between the Gi3 Interfaces. Which BGP attribute must the engineer configure on ASBR-201 so that the existing WAN link on Gi2 Is maintained as a backup?

Refer to the exhibit an engineer working for a private telecommunication company with an employee Id: 4065:96:080 upgrades the WAN link between routers ASBR-101 and ASBR-201 to 1Gb by Installing a new physical connection between the Gi3 Interfaces. Which BGP attribute must the engineer configure on ASBR-201 so that the existing WAN link on Gi2 Is maintained as… Read More »

Which outbound access list, applied to the WAN interface of a router, permits all traffic except for http traffic sourced from the workstation with IP address 10.10.10.1?

A. ip access-list extended 200deny tcp host 10.10.10.1 eq 80 any permit ip any any B. ip access-list extended 10deny tcp host 10.10.10.1 any eq 80 permit ip any any C. ip access-list extended NO_HTTPdeny tcp host 10.10.10.1 any eq 80 D. ip access-list extended 100 deny tcp host 10.10.10.1 any eq 80 permit ip any any Answer:… Read More »

Under which network conditions is an outbound QoS policy that is applied on a router WAN interface most beneficial?

A. under traffic classification and marking conditions B. under interface saturation conditions C. under all network conditions D. under network convergence conditions Answer: Option A. Explanation:  No answer description available for this question Show AnswerDiscussion The post Under which network conditions is an outbound QoS policy that is applied on a router WAN interface most beneficial? appeared first… Read More »

Which two use cases are valid for Cisco WAN Automation Engine? (Choose two.)

A. deployment of SR policies B. integration with Cisco XTC C. what-if analysis D. device manager E. network controller Answer: Option A, B. Explanation:  Reference: https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2018/pdf/BRKSPG-2008.pdf Slide 16 Show AnswerDiscussion The post Which two use cases are valid for Cisco WAN Automation Engine? (Choose two.) appeared first on Majanto.

Branch wireless users report that they can no longer access services from head office but can access services locally at the site. New wireless users can associate to the wireless while the WAN is down. Which three elements (Cisco FlexConnect state, operation mode, and authentication method) are seen in this scenario? (Choose three.)

A. authentication-local/switch-local B. WPA2 personal C. authentication-central/switch-central D. lightweight mode E. standalone mode F. WEB authentication Answer: Option A, B, E. Explanation:  No answer description available for this question. Show AnswerDiscussion The post Branch wireless users report that they can no longer access services from head office but can access services locally at the site. New wireless users… Read More »

EIGRP has been configured on all links. The spoke nodes have been configured as EIGRP stubs, and the WAN links to R3 have higher bandwidth and lower delay than the WAN links to R4. When a link failure occurs at the R1-R2 link, what happens to traffic on R1 that is destined for a subnet attached to R2?

Refer to the exhibit. EIGRP has been configured on all links. The spoke nodes have been configured as EIGRP stubs, and the WAN links to R3 have higher bandwidth and lower delay than the WAN links to R4. When a link failure occurs at the R1-R2 link, what happens to traffic on R1 that is destined for a… Read More »

An enterprise customer has these requirements: end-to-end QoS for the business-critical applications and VoIP services based on CoS marking. flexibility to offer services such as IPv6 and multicast without any reliance on the service provider. support for full-mesh connectivity at Layer 2. Which WAN connectivity option meets these requirements?

A. VPWS B. MPLS VPN C. DMVPN D. VPLS Answer: Option D. Explanation:  No answer description available for this question. Show AnswerDiscussion The post An enterprise customer has these requirements:<br> end-to-end QoS for the business-critical applications and VoIP services based on CoS marking. flexibility to offer services such as IPv6 and multicast without any reliance on the service… Read More »

An enterprise customer has these requirements: end-to-end QoS for the business-critical applications and VoIP services based on CoS marking. flexibility to offer services such as IPv6 and multicast without any reliance on the service provider. support for full-mesh connectivity at Layer 2. Which WAN connectivity solution meets these requirements?

A. VPWS B. MPLS VPN C. DMVPN D. VPLS Answer: Option D. Explanation:  No answer description available for this question. Show AnswerDiscussion The post An enterprise customer has these requirements: end-to-end QoS for the business-critical applications and VoIP services based on CoS marking. flexibility to offer services such as IPv6 and multicast without any reliance on the service… Read More »

Drag and drop the descriptions from the left onto the corresponding WAN connectivity types and categories on the right.

Drag and drop the descriptions from the left onto the corresponding WAN connectivity types and categories on the right. Select and Place: Answer: Explanation:  No answer description available for this question. Show AnswerDiscussion The post Drag and drop the descriptions from the left onto the corresponding WAN connectivity types and categories on the right. appeared first on Majanto.