Tag Archives: protocol

The network engineer who manages ASN 65010 is provisioning a customer VRF named CUSTOMERABC on PE-2. The PE-CE routing protocol is OSPF Internet reachability is available via the OSPF 0 0 0.0/0 route advertised by CE-1 to PE-1 In the customer VRF Which configuration must the network engineer Implement on PE-2 so that CE-2 has connectivity to the Internet?

Refer to the exhibit. The network engineer who manages ASN 65010 is provisioning a customer VRF named CUSTOMERABC on PE-2. The PE-CE routing protocol is OSPF Internet reachability is available via the OSPF 0 0 0.0/0 route advertised by CE-1 to PE-1 In the customer VRF Which configuration must the network engineer Implement on PE-2 so that CE-2… Read More »

An engineer has started to configure a router for secure remote access as shown. All users who require network access need to be authenticated by the SSH Protocol. Which two actions must the engineer implement to complete the SSH configuration? (Choose two.)

Refer to the exhibit. An engineer has started to configure a router for secure remote access as shown. All users who require network access need to be authenticated by the SSH Protocol. Which two actions must the engineer implement to complete the SSH configuration? (Choose two.) A. Configure an IP domain name. B. Configure service password encryption. C.… Read More »

A network engineer is configuring RIP as the routing protocol between multiple PEs and CEs. The engineer must avoid advertising the same routes back to their sources. Which action should be performed on the routers to accomplish this task?

A. Configure a different route distinguisher for each prefix. B. Define the site of origin on each interface. C. Define VRFs on each device to separate the traffic. D. Enable bidirectional forwarding detection on each device. Answer: Option A. Explanation:  No answer description available for this question Show AnswerDiscussion The post A network engineer is configuring RIP as… Read More »

A network engineer must configure a router for Flexible NetFlow IPFIX export. The IP address of the destination server is 172.17.12.1. The source address must be set to the Loopback0 IPv4 address and exported packets must be set to DSCP CS3. The TTL must be 64 and the transport protocol must be set to UDP with destination port 4739. Which configuration must the engineer apply to the router?

A. configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 3 ttl 64 export-protocol netflow-v9 transport udp 4739 end B. configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 24 ttl 64 export-protocol ipfix end C. configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 24 ttl 64 export-protocol netflow-v9 transport udp 4739 end D.… Read More »

In a Cisco SD-Access fabric, which control plane protocol is used for mapping and resolving endpoints?

A. DHCP B. VXLAN C. SXP D. LISP Answer: Option D. Explanation:  No answer description available for this question Show AnswerDiscussion The post In a Cisco SD-Access fabric, which control plane protocol is used for mapping and resolving endpoints? appeared first on Majanto.

An engineer is installing a new pair of routers in a redundant configuration. Which protocol ensures that traffic is not disrupted in the event of a hardware failure?

Refer to the exhibit. An engineer is installing a new pair of routers in a redundant configuration. Which protocol ensures that traffic is not disrupted in the event of a hardware failure? A. HSRPv1 B. GLBP C. VRRP D. HSRPv2 Answer: Option A. Explanation:  The “virtual MAC address” is 0000.0c07.acXX (XX is the hexadecimal group number) so it… Read More »

Which action is performed by Link Management Protocol in a Cisco StackWise Virtual domain?

A. It determines which switch becomes active or standby. B. It determines if the hardware is compatible to form the StackWise Virtual domain. C. It rejects any unidirectional link traffic forwarding. D. It discovers the StackWise domain and brings up SVL interfaces. Answer: Option C. Explanation:  No answer description available for this question Show AnswerDiscussion The post Which… Read More »

Which two namespaces does the LISP network architecture and protocol use? (Choose two.)

A. TLOC B. RLOC C. DNS D. VTEP E. EID Answer: Option B, E. Explanation:  Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s-book/irl-overview.html Show AnswerDiscussion The post Which two namespaces does the LISP network architecture and protocol use? (Choose two.) appeared first on Majanto.

A customer requests a network design that supports these requirements: * FHRP redundancy * multivendor router environment * IPv4 and IPv6 hosts Which protocol does the design include?

A. VRRP version 2 B. VRRP version 3 C. GLBP D. HSRP version 2 Answer: Option B. Explanation:  No answer description available for this question Show AnswerDiscussion The post A customer requests a network design that supports these requirements:<br> * FHRP redundancy<br> * multivendor router environment<br> * IPv4 and IPv6 hosts<br> Which protocol does the design include? appeared… Read More »