Tag Archives: route

A dispatcher notices that there are a lot of yellow dots within the resource trace route on the map of

A dispatcher notices that there are a lot of yellow dots within the resource trace route on the map of their technicians.Upon investigation, they find out that their technicians occasionally have to stop for about five minutes to verify the equipment in their truck enlroute to a customer site. It is determined that this Is acceptable behavior and… Read More »

The network engineer who manages ASN 65010 is provisioning a customer VRF named CUSTOMERABC on PE-2. The PE-CE routing protocol is OSPF Internet reachability is available via the OSPF 0 0 0.0/0 route advertised by CE-1 to PE-1 In the customer VRF Which configuration must the network engineer Implement on PE-2 so that CE-2 has connectivity to the Internet?

Refer to the exhibit. The network engineer who manages ASN 65010 is provisioning a customer VRF named CUSTOMERABC on PE-2. The PE-CE routing protocol is OSPF Internet reachability is available via the OSPF 0 0 0.0/0 route advertised by CE-1 to PE-1 In the customer VRF Which configuration must the network engineer Implement on PE-2 so that CE-2… Read More »

An engineer has started to configure a router for OSPF, as shown Which configuration must an engineer apply on the network so that area 15 traffic from R5 to R1 will prefer the route through R4?

Refer to the exhibit. An engineer has started to configure a router for OSPF, as shown Which configuration must an engineer apply on the network so that area 15 traffic from R5 to R1 will prefer the route through R4? A. Place the link between R3 and R5 in a stub area to force traffic to use the… Read More »

Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 networks via BGP and advertise them into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default route 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve the problem?

Refer to the exhibit. Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 networks via BGP and advertise them into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default route 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve the problem? A. router ospf… Read More »

An engineer is implementing a route map to support redistribution within BGP. The route map must be configured to permit all unmatched routes. Which action must the engineer perform to complete this task?

A. Include a permit statement as the first entry. B. Remove the implicit deny entry. C. Include at least one explicit deny statement. D. Include a permit statement as the last entry. Answer: Option D. Explanation:  No answer description available for this question Show AnswerDiscussion The post An engineer is implementing a route map to support redistribution within… Read More »

A customer has requested that the service provider use a Cisco MPLS TE tunnel to force the E-line service to take a specific route What is used to send the traffic over the tunnel?

A. static route B. preferred path C. forwarding adjacency D. autoroute destination Answer: Option B. Explanation:  No answer description available for this question Show AnswerDiscussion The post A customer has requested that the service provider use a Cisco MPLS TE tunnel to force the E-line service to take a specific route What is used to send the traffic… Read More »

EIGRP is running across the core to exchange internal routes, and each router maintains iBGP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1 and R2 for IP address 10.0.1.1, which is used as a black hole route as shown. Which configuration should the operator implement to the management router to create a route map that will redistribute tagged static routes into BGP and create a static route to blackhole traffic with tag 777 that is destined to the server at 192.168.10.100?

router(config)# route-map blackhole-trigger router(config-route-map)# match tag 777 router(config-route-map)# set ip next-hop 10.0.1.1 router(config-route-map)# set origin igp router{config-route-map)# set community no-export Refer to the exhibit. EIGRP is running across the core to exchange internal routes, and each router maintains iBGP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1… Read More »

An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue?

Refer to the exhibit. An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue? A. interface Vlan10 no ip vrf forwarding Clients !i nterface Vlan20 no ip vrf forwarding Servers !i nterface Vlan30 no… Read More »

After implementing the configuration, 172.20.20.2 stops replying to ICMP echos, but the default route fails to be removed. What is the reason for this behavior?

Refer to the exhibit. After implementing the configuration, 172.20.20.2 stops replying to ICMP echos, but the default route fails to be removed. What is the reason for this behavior? A. The threshold value is wrong. B. The source-interface is configured incorrectly. C. The destination must be 172.30.30.2 for icmp-echo. D. The default route is missing the track feature.… Read More »

Which statement about route targets is true when using VRF-Lite?

A. Route targets control the import and export of routes into a customer routing table. B. When BGP is configured, route targets are transmitted as BGP standard communities. C. Route targets allow customers to be assigned overlapping addresses. D. Route targets uniquely identify the customer routing table. Answer: Option A. Explanation:  No answer description available for this question… Read More »