Tag Archives: apply

You want to apply the principle of Least Privilege in all your live databases. One of your requirements

You want to apply the principle of Least Privilege in all your live databases.One of your requirements is to revoke unnecessary privileges from all users who have them using Privilege Analysis.Which three types of analyses can be done using the DBMS_PRIVILEGE_CAPTURE package? (Choose three.) A. analysis of all privileges used by all users including administrative users in the… Read More »

Which configuration must the engineer apply?

A network engineer must implement SNMPv2 with these parameters: * Enable SNMP community string c1sc0 with read-only permissions. * Enable interface index persistence. Restrict the SNMP community to only the monitoring server with IP address 198.18.19.100/32. * Provide view-only access to ospfIfEntry and ospfNbrEntry. Which configuration must the engineer apply? A. configure terminal access-list 5 permit 198.18.19.100 0.0.0.0… Read More »

An engineer has started to configure a router for OSPF, as shown Which configuration must an engineer apply on the network so that area 15 traffic from R5 to R1 will prefer the route through R4?

Refer to the exhibit. An engineer has started to configure a router for OSPF, as shown Which configuration must an engineer apply on the network so that area 15 traffic from R5 to R1 will prefer the route through R4? A. Place the link between R3 and R5 in a stub area to force traffic to use the… Read More »

Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 networks via BGP and advertise them into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default route 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve the problem?

Refer to the exhibit. Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 networks via BGP and advertise them into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default route 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve the problem? A. router ospf… Read More »

Router 1 and router 2 are running OSPF Area 0. The router logs on both routers show that the LDP link has flapped. Which configuration must the engineer apply to the two routers to implement session protection on the link?

Refer to the exhibit. Router 1 and router 2 are running OSPF Area 0. The router logs on both routers show that the LDP link has flapped. Which configuration must the engineer apply to the two routers to implement session protection on the link? A. Router 1(config)# ip cef distributed Router 1(config)# mpls ldp session protection global Router… Read More »

An engineer must apply an 802.1ad-compliant configuration to a new switchport with these requirements; The switchport must tag all trame when it enters the port The switchport Is expected to provide the same level of service to traffic from any customer VLAN Which configuration must the engineer use?

A. Option A B. Option B C. Option C D. Option D Answer: Option D. Explanation:  https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-3s/asr903/16-12-1/bce-xe-16-12-asr900/m_ce_802_1ad_900.html Show AnswerDiscussion The post An engineer must apply an 802.1ad-compliant configuration to a new switchport with these requirements; The switchport must tag all trame when it enters the port The switchport Is expected to provide the same level of service to… Read More »

A network engineer must configure a router for Flexible NetFlow IPFIX export. The IP address of the destination server is 172.17.12.1. The source address must be set to the Loopback0 IPv4 address and exported packets must be set to DSCP CS3. The TTL must be 64 and the transport protocol must be set to UDP with destination port 4739. Which configuration must the engineer apply to the router?

A. configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 3 ttl 64 export-protocol netflow-v9 transport udp 4739 end B. configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 24 ttl 64 export-protocol ipfix end C. configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 24 ttl 64 export-protocol netflow-v9 transport udp 4739 end D.… Read More »

ISP ASN 65100 provides Internet services to router CE-1 and receives customer prefix 198.18.18.0/24 via eBGP. An administrator for the ISP is now provisioning RTBH services to provide on-demand data-plane security for the customer’s IP space. Which route-map configuration must the administrator apply to router RTBH-1 to complete the implementation of RTBH services to CE-1?

Refer to the exhibit. ISP ASN 65100 provides Internet services to router CE-1 and receives customer prefix 198.18.18.0/24 via eBGP. An administrator for the ISP is now provisioning RTBH services to provide on-demand data-plane security for the customer’s IP space. Which route-map configuration must the administrator apply to router RTBH-1 to complete the implementation of RTBH services to… Read More »

An engineer attempts to configure a trunk between switch SW1 and switch SW2 using DTP, but the trunk does not form. Which command should the engineer apply to switch SW2 to resolve this issue?

Refer to the exhibit. An engineer attempts to configure a trunk between switch SW1 and switch SW2 using DTP, but the trunk does not form. Which command should the engineer apply to switch SW2 to resolve this issue? A. switchport nonegotiate B. no switchport C. switchport mode dynamic desirable D. switchport mode access Answer: Option C. Explanation:  No… Read More »