Tag Archives: VLAN

An engineer must apply an 802.1ad-compliant configuration to a new switchport with these requirements; The switchport must tag all trame when it enters the port The switchport Is expected to provide the same level of service to traffic from any customer VLAN Which configuration must the engineer use?

A. Option A B. Option B C. Option C D. Option D Answer: Option D. Explanation:  https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-3s/asr903/16-12-1/bce-xe-16-12-asr900/m_ce_802_1ad_900.html Show AnswerDiscussion The post An engineer must apply an 802.1ad-compliant configuration to a new switchport with these requirements; The switchport must tag all trame when it enters the port The switchport Is expected to provide the same level of service to… Read More »

Which two commands ensure that DSW1 becomes the root bridge for VLAN 10 and 20? (Choose two.)

Refer to the exhibit. Which two commands ensure that DSW1 becomes the root bridge for VLAN 10 and 20? (Choose two.) A. spanning-tree mst 1 priority 4096 B. spanning-tree mst 1 root primary C. spanning-tree mst vlan 10,20 priority root D. spanning-tree mst 1 priority 1 E. spanning-tree mstp vlan 10,20 root primary Answer: Option A, B. Explanation: … Read More »

Which two commands ensure that DSW1 becomes root bridge for VLAN 10? (Choose two.)

Refer to the exhibit. Which two commands ensure that DSW1 becomes root bridge for VLAN 10? (Choose two.) A. DSW1(config)#spanning-tree vlan 10 priority 4096 B. DSW1(config)#spanning-tree vlan 10 priority root C. DSW2(config)#spanning-tree vlan 10 priority 61440 D. DSW1(config)#spanning-tree vlan 10 port-priority 0 E. DSW2(config)#spanning-tree vlan 20 priority 0 Answer: Option A, B. Explanation:  No answer description available for… Read More »

A network administrator has designed a network with two multilayer switches on the distribution layer, which act as default gateways for the end hosts. Which two technologies allcw every end host in a VLAN to use both gateways? (Choose two.)

A. VRRP B. GLBP C. VSS D. MHSRP E. HSRP Answer: Option A, D. Explanation:  No answer description available for this question Show AnswerDiscussion The post A network administrator has designed a network with two multilayer switches on the distribution layer, which act as default gateways for the end hosts. Which two technologies allcw every end host in… Read More »

VLANs 50 and 60 exist on the trunk links between all switches. All access ports on SW3 are configured for VLAN 50 and SW1 is the VTP server. Which command ensures that SW3 receives frames only from VLAN 50?

Refer to the exhibit. VLANs 50 and 60 exist on the trunk links between all switches. All access ports on SW3 are configured for VLAN 50 and SW1 is the VTP server. Which command ensures that SW3 receives frames only from VLAN 50? A. SW1(config)#vtp mode transparent B. SW3(config)#vtp mode transparent C. SW2(config)#vtp pruning D. SW1(config)#vtp pruning Answer:… Read More »

A client device roams between access points located on different floors in an atrium. The access points are joined to the same controller and configured in local mode. The access points are in different AP groups and have different IP addresses, but the client VLAN in the groups is the same. What type of roam occurs?

A. inter-controller B. inter-subnet C. intra-VLAN D. intra-controller Answer: Option D. Explanation:  Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_010011.html Show AnswerDiscussion The post A client device roams between access points located on different floors in an atrium. The access points are joined to the same controller and configured in local mode. The access points are in different AP groups and have different IP… Read More »

When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?

A. config flexconnect BranchA-FCG vlan 30 add B. config flexconnect BranchA-FCG vlan add 30 C. config flexconnect group BranchA-FCG vlan 30 add D. config flexconnect group BranchA-FCG vlan add 30 Answer: Option D. Explanation:  No answer description available for this question. Show AnswerDiscussion The post When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN… Read More »

Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?

A. FlexConnect ACL B. VLAN name override C. CCKM/OKC D. AAA override Answer: Option D. Explanation:  No answer description available for this question. Show AnswerDiscussion The post Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping? appeared first on Majanto.

Which configuration ensures that the switch is always the root for VLAN 750?

A. Switch(config)#spanning-tree vlan 750 priority 38418607 B. Switch(config)#spanning-tree vlan 750 priority 0 C. Switch(config)#spanning-tree vlan 750 root primary D. Switch(config)#spanning-tree vlan 750 priority 614440 Answer: Option C. Explanation:  No answer description available for this question. Show AnswerDiscussion The post Which configuration ensures that the switch is always the root for VLAN 750? appeared first on Majanto.

Which VLAN ID is associated with the default VLAN in the given environment?

Refer to the exhibit. Which VLAN ID is associated with the default VLAN in the given environment? A. VLAN 1 B. VLAN 5 C. VLAN 10 D. VLAN 20 Answer: Option A. Explanation:  No answer description available for this question. Show AnswerDiscussion The post Which VLAN ID is associated with the default VLAN in the given environment? appeared… Read More »