Tag Archives: receiving

Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 networks via BGP and advertise them into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default route 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve the problem?

Refer to the exhibit. Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 networks via BGP and advertise them into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default route 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve the problem? A. router ospf… Read More »

An administrator is configuring RADIUS on a Cisco switch with a key set to Cisc407294634 but is receiving the error “Authentication failed: 22040 Wrong password or invalid shared secret.” What must be done to address this issue?

A. Add the network device as a NAD inside Cisco ISE using the existing key. B. Configure the key on the Cisco ISE instead of the Cisco switch. C. Validate that the key is correct on both the Cisco switch as well as Cisco ISE. D. Use a key that is between eight and ten characters. Answer: Option… Read More »

R3 is: failing to accept multicast RP information from Domain-A advertising MSDP SA messages to R1 and R4 receiving SA messages only from R4 Which command must the engineer implement to resolve the issue?

Refer to the exhibit. R3 is: failing to accept multicast RP information from Domain-A advertising MSDP SA messages to R1 and R4 receiving SA messages only from R4 Which command must the engineer implement to resolve the issue? A. R3# ip msdp sa-filter in 192.168.3.1 B. R3# no ip msap sa-filter in 192.168.1.1 C. R3# no ip msdp… Read More »

A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?

Refer to the exhibit. A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if… Read More »

A customer reports that Host-1 is failing to receive streaming traffic from the IPTV source. The engineer has confirmed that hosts on router R2 are receiving traffic normally and that Host-1 is correctly sending subscription messages to join the IPTV stream. Which action must the engineer take to correct the problem?

Refer to the exhibit. A customer reports that Host-1 is failing to receive streaming traffic from the IPTV source. The engineer has confirmed that hosts on router R2 are receiving traffic normally and that Host-1 is correctly sending subscription messages to join the IPTV stream. Which action must the engineer take to correct the problem? A. Remove IP… Read More »

A network engineer applied configuration on R1 to summarize all ISIS routes, but R2 is still receiving specific routes from R1. The engineer has confirmed that both routers are configured with the correct summarization configuration, but R1 is not sending the correct summary routes. Which configuration must be applied to router R1 to summarize routes within Level 1?

Refer to the exhibit. A network engineer applied configuration on R1 to summarize all ISIS routes, but R2 is still receiving specific routes from R1. The engineer has confirmed that both routers are configured with the correct summarization configuration, but R1 is not sending the correct summary routes. Which configuration must be applied to router R1 to summarize… Read More »

When PC-A sends traffic to PC-B, which network component is in charge of receiving the packet from PC-A, verifying the IP addresses, and forwarding the packet to PC-B?

Refer to the exhibit. When PC-A sends traffic to PC-B, which network component is in charge of receiving the packet from PC-A, verifying the IP addresses, and forwarding the packet to PC-B? A. router B. Layer 2 switch C. load balancer D. firewall Answer: Option A. Explanation:  No answer description available for this question. Show AnswerDiscussion The post… Read More »

An administrator must secure the WLC from receiving spoofed association requests. Which steps must be taken to configure the WLC to restrict the requests and force the user to wait 10 ms to retry an association request?

A. Enable MAC filtering and set the SA Query timeout to 10. B. Enable 802.1x Layer 2 security and set the Comeback timer to 10. C. Enable Security Association Teardown Protection and set the SA Query timeout to 10. D. Enable the Protected Management Frame service and set the Comeback timer to 10. Answer: Option C. Explanation:  No… Read More »

The Website For Your Retail Business Is Receiving A Lot Of Visitors, But Few Of Them Are Looking At More Than One Page. What’s Most Likely To Be The Problem?

The Website For Your Retail Business Is Receiving A Lot Of Visitors, But Few Of Them Are Looking At More Than One Page. What’s Most Likely To Be The Problem? Your website is too slow to load quickly on mobile devices. There are too many reader-pleasing images on your landing page. Your website doesn’t have a blog page to attract… Read More »